|
|
|
|
 |
PEN-VAC & PRO-SERIES Hand
Held Parts Pickup Tools. No Hoses or Batteries
Virtual Industries Pen-Vac tools with aluminum or plastic bodies and ESD
suction cups. This self-contained unit lifts up to 500 grams and can be
purchased with different cup sizes and color. |
|
|
 |
HANDI-VAC Low Cost Squeeze Bulb
Vacuum Pickup Tool.
Static dissipative, with conductive
silicone vacuum cups.Applications for this tool include SMT parts, metal
parts, plastic parts or any item having a smooth-nonporous-surface that
the rubber vacuum tweezer tip can seal against |
|
|
 |
BULB-VAC Low Cost Squeeze bulb
with ESD-Safe Vacuum Cups.
Our vacuum-bulb type tools are the lowest cost pick-and-place tools
available. These tools operate very similar to a tweezer. Simply squeeze
the vacuum bulb, place the soft suction cup to the part to be handled,
then relax your squeeze and the part is firmly gripped. A second squeeze
releases the part. |
|
|
 |
Bench Top Vacuum Systems |
|
|
 |
Vacuum Cups Replacement vacuum
cups and cup kits for all Virtual products.
Our vacuum cups can handle electronic components, glass lenses and
certain medical applications. Order them in singles or in a package. |
|
 |
Delrin Tips and Tips Sets for
Small Parts as Small as 100 Microns
Bent or Straight ESD small parts tips must be used with a continuous
vacuum source. |
|
|
 |
VTH Series Vacuum Tips Holder with 8
or 16 locations
Table top luer slip vacuum tips holder with non-slip rubber feet. Posts
will accommodate up to sixteen of our luer slip vacuum tips. Vacuum tips
not included. |
|
|
V8920-LMS-ESD
V8920-LMS-ESD $59.95
 |
PEN-VAC V8920-LMS-ESD
- Pick ups 500g or less components.
- Aluminum body that is ESD Safe.
- Kit includes 6 tips and suction cups.
|
|
Pen-Vac
Pro Series
Model V8910-9BK-ESD
V8910-9BK-ESD $36.95
|
-
Like the original except it
uses plastic tubing instead of aluminum
-
Lifts up to 500 grams
-
Plastic, 1/2 inch diameter
body
-
Self-contained unit
-
Comes in Black Only
-
Three angled probes and one
straight probe with 4 cups. Cup sizes 1/8", 1/4", 3/8" and 1/4"
included.
|
Click for large image |
Vacuum
Cups and Probe
|
|
Slim-Vac
Model
V9501-ESD
V9501-ESD
$57.70
|
- Ergonomically designed
- Self-contained, uses no hoses or batteries
- Lifts up to 500 grams
- 3/8-inch diameter stainless steel body
- Comes w/1/8" & 1/4" cups with bent probes and
1/8" & 3/8" cups with straight probes
-
ESD safe
|
|
Vacula
Model VC-1-ESD
VC-1-ESD
$57.70
|
- Self-contained, uses no hoses or batteries
- Lightweight 3/8-inch stainless steel body
- Comes w/1/4", 3/8" & 1/2" straight probes
-
Plunger-type vacuum lifts up to 500 grams
-
ESD Safe
|
|
Handi-Vac
Model HV-KIT-ESD
HV-KIT-ESD
$15.95
|
- Our lowest-priced vacuum handling kit
- Comes w/1/8" and 1/4" cups with bent probes and
1/8" and 3/8" cups with straight probes
-
Simple design and operation
- 2 3/4" (69.85mm) long
-
ESD safe
|
|
Bulb-Vac
Model BVJ-038-ESD
 |
- Economical and easy-to-use
- Constructed of all ESD-safe materials
- Extra large vacuum reservoir provides extended
holding time
- For the user who needs minimal placement accuracy
- Comes with only one tip and vacuum cup (Choose
cup below)
3/8" Cup BVJ-038-ESD
$15.95
1/2" Cup BVJ-050-ESD
$15.95
5/8" Cup BVJ-062-ESD
$17.25
3/4" Cup BVJ-075-ESD
$17.25
Vacuum Cups and Probes |
|
Air Operated
Vacuum Handling Tool
 |
KDS301 BY KAHNETICS
Delrin Tips
for chips and small parts (For use only
with continuous vacuum tools) |
|
SMD-VAC-GP
This unit is not available in 220 Volt
Use Model V8400 and choose 220 Volt |
Model
V8000
$159.95
(Without
Holder)
Model
V8000-HLD
$174.95
(With
Holder)
This is a general purpose vacuum handling tool that plugs
directly into 110VAC. This compact unit will handle any of the surface
mount components used in the industry today. The long life diaphragm
vacuum pump generates over 6 inches of mercury . The unit connects to
ground automatically with a three wire power cord.
The SMD-VAC-GP comes with the following
features:
4 feet of coiled vacuum hose |
75mm x 152.5mm x 62.2mm |
|
A set of nine vacuum tips |
Rubber no skid feet |
|
A vacuum pick-up handle |
Produces vacuum of over six inches of mercury |
|
Optional side mounted handle holder |
Delrin Tips
for chips and small parts (For use
only with continuous vacuum tools) |
|
|
SMD-VAC-HF
This unit is also available in 220 Volt
Click the 'Buy Now' button and choose 220 Volt |
Model
V8400
$249.95
(Without
Holder)
Model
V8400-HLD
$270.00
(With
Holder)
This is a general purpose vacuum handling tool that plugs
directly into 110VAC and provides twice the air flow as the SMD-VAC-GP.
This compact unit will handle any of the surface mount components used
in the industry today. The long lift diaphragm pump generates ten inches
of mercury and an open air flow of 2 lpm. The unit connects to ground
automatically with a three wire power cord.
The SMD-VAC-HF comes complete with the following
features:
|
4 feet of coiled vacuum hose |
75mm x 152.5mm x 62.2mm |
|
A set of 9 vacuum tips |
Rubber no skid feet |
|
A vacuum pick-up handle |
Produces vacuum of over ten inches of mercury |
Delrin Tips
for chips and small parts (For use
only with continuous vacuum tools) |
|
|
SMD-VAC-HP
V8100A-FS $450.00
(As
shown below)
This unit has additional pick-up power for handling small to
very large size components. The precision pump and motor generate over
fifteen inches of mercury. The compact tower design takes up a very small
footprint on the bench. An electric eye pen holder on the side automatically
shuts the unit off when the vacuum pen is placed in it. A jack on the rear
allows use of the optional foot or hand switch to control vacuum during pick
and place operations. When using the foot switch, an internal solenoid
allows immediate vacuum and immediate release for the accurate placing of
small parts.
This unit is also available in 220 Volt
Click the 'Buy Now' button and choose 220 Volt |
The SMD-VAC-HP
comes complete with the following features:
- Quiet operation
- 4 feet of coiled vacuum hose
- A set of nine vacuum tips
- A vacuum pick-up handle
- 12 Volt DC power source
- Compact design 75mm x 62.2mm x 152.5mm
- Automatic vacuum pump ON/OFF control
- Rubber no-skid feet
- ESD connection on rear of unit
- Produces vacuum of over fifteen inches of
mercury
V8100A-FS...$450.00 Includes
foot switch and internal solenoid
V8100A...$395.00
Without
foot switch
V8100...$339.95
(Same as V8100A except no foot switch connection or internal solenoid)
VFS-1...$45.00
Foot
switch can be used with V8100A (This will include a handle without the
control hole)
Delrin Tips
for chips and small parts (For use
only with continuous vacuum tools) |
|
PAC-VAC™
 |
V3200
The PAC-VAC is battery operated and
self-contained, runs up to eight hours continuously on one 9 volt
alkaline battery. This versatile unit can be clipped to your belt or
pocket for one-handed portable operation. The PAC-VAC is constructed
with ESD safe materials and comes complete with the following features:
- A belt/pocket clip on the housing.
- 4 feet of coiled vacuum hose,#VCH-1/16-4.
- A set of nine vacuum tips,#VCS-7-B.
- A vacuum pick-up handle,#V3020-RF-1/16.
- 9 volt disposable alkaline battery.
- Lightweight -only 156 grams.
- Produces vacuum of over ten inches of
mercury.
V3200
PAC-VAC kit $220.00
VCS-9-ESD Replacement probe/cup/kit
$20.45
Delrin Tips
for chips and small parts
(For use only with continuous vacuum tools) |
