V8910-BK-LMS-ESD PEN-VAC Plastic
Body Vacuum Pen
with 6 Probes and Vacuum Cups
PEN-VAC PRO SERIES black body, probes (1) bent (1) straight each
with 1/8" (3.18mm), 1/4" (6.35mm) and 3/8" (9.53mm) diameter meter
conductive silicone vacuum cups.
V8910-BK-LMS-ESD
$43.20
Like the original except it
uses plastic tubing instead of aluminum
Lifts up to 500 grams
Plastic, 1/2 inch diameter
body
Self-contained unit
Comes in Black Only
The PEN-VAC is totally
self-contained. There are no batteries or hoses to get in the way.
Operation is as follows:
1. Select a tip with a rubber vacuum cup on a probe that is slightly
smaller than the part you want to pick and place. Put the probe snuggly
on the tip of the vacuum pen. Make sure that there is no dust on the
rubber vacuum tip. NOTE: Our larger rubber vacuum cups can be placed
directly on the vacuum pen tip without using a probe.
2. Depress AND hold the button on the side of the tool.
3. Touch the vacuum tip squarely to the part and release the button.
The part is now grasped.
4. Move the part to where you want it and depress the button again. The
part is now released.
NOTE: This tool works only with the rubber vacuum tips. The rubber is
required for an air-tight seal.
Howard Electronic Instruments, Inc. Address and Information
Howard Electronic Instruments, Inc.
974 SE Pioneer Rd
El Dorado, KS 67042 1-800-394-1984
Toll Free (USA and
Canada)
316-321-2800 Local
01-316-321-2800 International Phone 316-223-3111 NEW Fax
Number
