RX-802AS
The ultimate solution for lead free soldering
ESD Safe Temperature Controlled Lead Free Fast Response Soldering Station (More goot products)
ThegootRX-802AS is a compact
and lightweight lead-free soldering station with excellent heat recovery. It
combines sophistication and high efficiency in a compact design, promising
excellence in soldering work for the lead-free generation.
Merits of goot RX-802AS
Superior heat recovery Built-in high-powered heater (72W) capable of
delivering enough power to maintain stable tip temperatures, even under
different soldering work conditions. Minimal heat loss means the user
doesn't have to set the station at a higher set temperature. Capable of
being set at lower temperatures, therefore decreasing tip degeneration
when soldering with high melting point lead-free solder.
Thick iron coating All RX-80HRT tips have a thick iron coating. For example, the thickness of the B-type iron coating is 0.5mm or above,
while the thickness of tips in competitor irons are between 0.25mm and
0.3mm. More thickness assures longer tip life. The following test report
back up this fact.
Click
image to enlarge RX-802AS
$385.00
includes stand, hand piece, and one extra standard tip
Compliant with ISO 9000 series.
Equivalent to IPC/EIA J-STD-001C
Superior sleep function (Patented) Automatic switch off when inactive for a preset period
of time. This is easier on the tips than switching the unit OFF.
This unit's sleep function can be programmed to activate at preferred
inactive time periods, or can be programmed to go into sleep mode at a
certain drop in tip temperature, therefore applicable to a variety of work
conditions. (Competitor stations have one set mode only.) Further, before sleep mode activates, the sleep lamp flashes, warning the
user that the unit is about to enter sleep mode. Bringing the tool out
of the Sleep Mode is as easy as wiping the tip on a sponge to clean the
tip.
Fastest in it's class Reaches tip
temperature in 6 seconds. (Equivalent products among competitors take an
average of 15 seconds.)
Light and compact handpiece The soldering iron weighs 27 g, the lightest in the 70W
station class. (Competitor models weigh 30g.) The soldering unit cord is
designed with a thin and very pliable cable with the diameter 4mm.
(Competitors cable diameter - 4.6mm.)
RX-802AS Handpiece compared to competitors: It is a neglected point but, the biggest selling point of the RX-802AS is
that the whole iron length of the handpiece is shorter that competitor
irons. It is not enough that the distance between tip and handpiece is
short. Pulling force from the cable is applied to the tip every time the
iron is moved. This has adverse effects for operation. Lessening this
force is important to the operator. Shorter iron length makes this force
smaller.
Easy-change tip One-Step-Slide tip can be changed while the tips remain
hot. New tip can be inserted without danger of burns because the tip does
not heat until the operator pushes any button on the control unit. Six
seconds after pushing any button the unit is ready for full operation.
RX-802AS Replacement tips compared to competitors: 6.1 No tools needed for changing the tip, also no heat-resistant
pads! 6.2 Tips can be stored in the RX-802AS soldering iron stand which
comes with the unit. The user must purchase separately with some
competitor stations. 6.3 The tips are designed NOT to come in contact
with the surface
when placed on a workbench.
Maintenance and tip replacement is simple with the sensor and heater
integrated into the tip.
Tips are manufactured by
goot and can be custom built to your
specifications.
Howard Electronic Instruments, Inc. Address and Information
Howard Electronic Instruments, Inc.
974 SE Pioneer Rd
El Dorado, KS 67042 1-800-394-1984
Toll Free (USA and
Canada)
316-321-2800 Local
01-316-321-2800 International Phone
316-321-2803 Fax
RX-802AS
The ultimate solution for lead free soldering
